有了Booch Tank 發酵桶，我們對康普茶的釀造和發酵過程有了全新的了解。寬大的且完全可打開的蓋子使SCOBY餅的取出變得容易，網狀覆蓋的O2端口使SCOBY餅可以自然呼吸，不受限制地生長。耐用性是Ss Brewtech品牌的標誌，其304不銹鋼結構和衛生焊接的TC配件也是最好的設計。 

• 以下兩件套
• 不適合BME KETTLE！
• 1個惠而浦配件
• 1 x 1/2“螺紋隔板
• 304 Ss建設
• 高溫矽膠O型圈
• 適合13/16“打孔
• 1/2“球閥不包括在內
• • SET OF TWO PIECES BELOW
  • NOT FOR BME KETTLE!!!
  • 1 x Whirlpool fitting
  • 1 x 1/2" Threaded bulkhead
  • 304 Ss construction
  • Hi-temp silicone o-rings
  • Fits into 13/16" punch hole
  • 1/2" Ball Valve not included

  • Whirlpool | Kit for Standard Kettle w/ Bulkhead

• 高溫食品級矽膠墊圈
• 一套2個  
• 適用於Ss / Norcal假底
• • High temp food grade silicone washer
  • Set of 2 pcs  
  • For use with Ss / Norcal false bottoms

  • Washer | NorCal False Bottoms

• 適用於BME KETTLE
• 1.5“TC
• 1/2“軟管倒鉤
• 不適合標準的牛仔褲
• 這是一個TRI-CLAMP部分
• 不包括TC鉗（s）
• 不包括TC墊片
• 不包括軟管夾
• 如圖所示發貨
• • FOR USE ON BME KETTLE
  • 1.5" TC
  • 1/2" hose barb
  • NOT FOR STANDARD KETTLES
  • THIS IS A TRI-CLAMP PART
  • Does not include TC clamp(s)
  • Does not include TC gasket(s)
  • Does not include hose clamp(s)
  • Shipped as shown

  • Whirlpool Tee for BME Kettle

• 高溫PTFE墊圈
• 一套2個
• 用於溫度計端口插頭
• 適用於1/2“球閥配件
• 用於溫度計耦合
• • High temp PTFE washer
  • Set of 2 pcs
  • For thermometer port plug
  • For 1/2" ball valve fitting
  • For thermometer coupling

  • Washer for Ss Brew Kettle Compression Fittings

• 304不銹鋼結構
• 插入再循環艙壁配件
• 1/2“滾花FPT鎖緊螺母
• Vorlauf完成後，無焊接配件易於拉出
• • 304 Stainless Steel construction
  • Plugs into re-circulation bulkhead fitting
  • 1/2" knurled FPT locking nut
  • Weldless fitting easy to pull out when finish w/ Vorlauf

  • Vorlauf | Attachment for Re-Circ Bulkhead

• 3/8“迷你球閥
• 304不銹鋼
• 包括貨架臂
• 包括所有O形圈
• 添加閥門以將標準Chronical升級到BME
• BME Chronicals的替換樣品閥
• 所有Brew桶的更換閥
• • 3/8" Mini Ball Valve
  • 304 Stainless Steel
  • Includes Racking Arm
  • All O-rings included
  • Add valve to upgrade standard Chronical to BME
  • Replacement sample valve for BME Chronicals
  • Replacement valve for all Brew Buckets

  • Valve | ⅜” 2 pc with Racking Arm

• 304 Ss建設
• 不適合BME KETTLE !!!!
• 與我們的水壺球閥相同
• 不包括trub dam / pick tube
• 閥門組件/ O形圈
• 高溫矽膠O型圈
• 非常適合捆綁漩渦配件和溫度計艙壁（漩渦配件需要）
• • 304 Ss construction
  • NOT FOR BME KETTLE!!!!
  • Same as our kettle ball valve
  • Does not include trub dam/pickup tube
  • Valve assembly / o-rings only
  • Hi-temp silicone o-rings
  • Great for bundle with whirlpool fitting and thermometer bulkhead (needed for the whirlpool fitting)

  • Valve | ½” 3 Piece Ball Valve

• 304 Ss建設
• 快速清潔型球閥
• 1.5“TC法蘭兩端
• 1“鑽孔
• 超級易拆卸/清潔！
• • 304 Ss construction
  • Quick clean type ball valve
  • 1.5" TC flanges both ends
  • 1" bore
  • Super easy to disassemble/clean!

  • Valve | 1.5” TC Quick Clean 1” Bore

• 304不銹鋼結構
• 擠壓扳機/全不銹鋼（無塑料）
• 我們自己的Ss定制“粗短”處理 
• 手柄上的激光蝕刻Ss Brewtech徽標
• 與我們的TC手臂組合使用！
• 請參閱14 Gal Chronical的縮略圖
• 14 Gal Chronical排放閥是垂直安裝
• 7 Gal / Half bbl水平安裝好
• • 304 Stainless Steel construction
  • Squeeze trigger / all stainless (no plastic)
  • Our own Ss custom "stubby" handles 
  • Laser etched Ss Brewtech logo on handle
  • Use in combo with our TC racking arm!
  • Please see thumbnail pic for 14 Gal Chronical
  • 14 Gal Chronical dump valve is vertical mount
  • 7 Gal / Half bbl horizontal mount okay

  • Valve | 1.5” TC Butterfly

• 304不銹鋼結構
• 拉動扳機開啟和關閉
• 3位置鎖定：打開，50％，關閉
• 4路可調拉動扳機方向
• 高熱能矽膠閥座
• • 304 Stainless Steel construction
  • Pull Trigger opening and closing
  • 3 position lockout: Open, 50%, Closed
  • 4 way adjustable pull trigger orientation
  • High heat capable silicone valve seat

  • Valve | 1.5" TC Pull Butterfly

• 以呎計算單價
• 1" 內徑  $222 / 呎
• 1/2“ 內徑  $ 82 / 呎
• 3/8“內徑  $ 65 / 呎
• 食品級矽膠管/無異味
• 推薦5個月的時間
• 1“內徑（ID）用於我們的1“TC倒鉤（BME酵母轉儲）
• 1/2“內徑（ID）完全適合Brew Bucket蓋孔用於任何1/2“倒鉤推薦3腳的桶
• 3/8“內徑（ID）在HLT上使用3/8“倒鉤 ,用於Brew Bucket龍頭（3/8）