四個輪$1483元

三個輪$1120元

不推薦用於1bbl坦克（改為使用高清腳輪） 

• 與標準7 Chronial不兼容 
• 套件包括3或4個帶調平墊圈的腳輪
• 請根據腿數選擇套件
• 兼容Chronicals，Unitanks和Brite Tanks
• 3/8“x 1.5”桿
• 包括剎車
• 鍍鋅螺紋桿
• 高品質PP輪
• 雙軸承輪

 *不適合在滿載時移動。

Not recommended for 1bbl tanks (use HD Casters instead) 

• Not compatible with standard 7 Chronial 
• Kit includes 3 or 4 casters with leveling washers
• Please choose kit based on number of legs
• Compatible with Chronicals, Unitanks, and Brite Tanks
• 3/8" x 1.5" stem
• Includes brake
• Zinc coated threaded stem
• High quality PP wheels
• Double bearing wheels

 *Not intended to be moved when full.

Casters | Chronicals & Brites

標準7 GAL CHRONICAL - 不是BREWMASTER版

• 一套3
• 在腿部底部滑動/不需要螺紋插入物
• 304不銹鋼“靴子”
• 矽膠套插件固定在腿上
• 在鑄造機上鍍鋅螺紋桿
• 高品質PP輪
• 雙滾珠軸承輪
• 如果您想在7加侖的時間內放置不銹鋼貨架，您需要購買在腿部底部有3/8螺紋插入的腿部延伸，並且您想要購買螺紋3/8“的STEM型腳輪 - DO如果您想為您的單位購買貨架，請不要購買這些腳輪）

• FOR STANDARD 7 GAL CHRONICAL - NOT BREWMASTER EDITION

• Set of 3
• Slips over leg bottoms / no need for threaded insert
• 304 Stainless "boot"
• Silicone sleeve insert to secure on leg
• Zinc coated threaded stem on caster
• High quality PP wheels
• dual ball bearing wheels
• IF YOU WANT TO PUT A STAINLESS SHELF ON YOUR 7 GALLON CHRONICAL, YOU NEED TO BUY LEG EXTENSIONS WHICH HAVE A 3/8TH THREADED INSERT ON THE LEG BOTTOM AND YOU'LL WANT TO BUY THE THREADED 3/8" STEM TYPE CASTERS - DO NOT BUY THESE CASTERS IF YOU WANT TO BUY THE SHELF FOR YOUR UNIT)

• Casters | 7 gal Chronical (with Boots)

• 全不銹鋼腳輪架帶剎車
• 專為惡劣的啤酒廠沖洗環境而設計
• 適用於半桶和1桶容器
• 3“輪徑
• 3/8“x 1.5”鍍鋅閥桿
• 每個施法者250磅的額定載荷
• 包括不銹鋼墊圈調平套件
• • All-stainless caster frame with brake
  • Designed for harsh brewery wash-down environments
  • Ideal for use with half bbl and 1 bbl Vessels
  • 3" wheel diameter
  • 3/8" x 1.5" zinc coated stem
  • 250 lb load rating per caster
  • Includes stainless washer leveling kit

  • HD Casters | Unitanks, Chronicals, & Brites

• 對於1.5“TC
• 304不銹鋼
• 密封TC閥門的衛生方式
• 在其中鑽孔以獲得定製配件
• • For 1.5" TC
  • 304 Stainless
  • Sanitary way to seal off TC valves
  • Drill holes in them for custom fittings

• 如果您購買了Brewmaster Edition Chronical發酵罐（標準配置），請勿購買
• 如果您購買單獨的3“TC Chronical蓋子（作為配件），那麼您將需要選擇它！
• 304不銹鋼
• 包括定制的1/2“不銹鋼軟管倒鉤
• 17毫米孔用於1/2“管或＃2塞子
• 包括減壓閥（見縮略圖）
• 3“TC墊片不包括在內
• • DO NOT BUY if you purchased a Brewmaster Edition Chronical fermenter (it is standard)
  • If you buy separate 3" TC Chronical lid (as accessory), then you will want to pick this up!
  • 304 Stainless Steel
  • Includes custom fabricated 1/2" stainless hose barb
  • 17mm hole for 1/2" tubing or #2 stopper
  • Pressure relief valve included (see thumbnail)
  • 3" TC gasket not included

• 304不銹鋼
• 為改造10加侖Mash Tun
• 或者您選擇的任何水壺
• 兼容的配件：
• Vorlauf附件（可選附件）
• 再循環歧管（可選附件）
• 1/2“滾花FPT至3/8”軟管倒鉤（可選附件）
• 查看我們的硬質合金孔鋸改裝套件！
• • 304 Stainless Steel
  • For retrofit of 10 gal Mash Tun
  • Or for any kettle of your choice
  • Compatible w/ MT accessories:
  • Vorlauf attachment (OPTIONAL ACCESSORY)
  • Re-circulation manifold (OPTIONAL ACCESSORY)
  • 1/2" knurled FPT to 3/8" hose barb (OPTIONAL ACCESSORY)
  • Check out our carbide hole saw retrofit kit!

• 幾乎可以在任何容器上添加1.5英寸TC法蘭！
• 無焊接設計
• 適用於FTS和Brew Bucket平蓋加壓傳輸
• 與我們的  加壓轉移配件一起使用 （如圖所示）
• 304不銹鋼結構
• 高熱兼容矽膠O形圈
• 需要TC Clamp和Gasket
• 需要42 mm硬質合金孔鋸
• • Add a 1.5" TC flange to virtually any vessel!
  • Weldless design
  • Ideal for FTSs and Brew Bucket flat lid pressurized transfers
  • Use with our Pressurized Transfer Fitting (as shown in pictures)
  • 304 Stainless Construction
  • High heat compatible silicone O-ring
  • Requires TC Clamp and Gasket
  • Requires 42 mm carbide hole saw

• 由耐用的矽膠材料製成
• 與Bucket Mini標配的底座相同
• Made of durable silicone material
• Same as base that comes standard with the Bucket Mini

• Base | Brew Bucket Mini

• 1/2“NPT至1.5”TC 3件式球閥
• 1/2“ID閥體
• 集成的惠而浦噴嘴
• 兼容所有eKettles
• 304不銹鋼
• 不包括TC Clamp或Gasket
• • 1/2" NPT to 1.5" TC 3 Piece Ball Valve
  • 1/2" ID Valve Body
  • Integrated Whirlpool Nozzle
  • Compatible with all eKettles
  • 304 Stainless Steel
  • Does not include TC Clamp or Gasket

• 非常適合我們的BME Kettle切向入口
• Brewer級304不銹鋼
• 3件式球閥
• 1/2“ID閥體
• 1.5“TC一側
• 1/2“螺紋NPT（母）另一側
• 不包括TC墊片
• 不包括TC箝位
• 不包括1/2“軟管倒鉤

Valve | Ball Valve 1.5" TC to 1/2" Female NPT

• Perfect for our BME Kettle tangential inlet
• Brewer's grade 304 Stainless Steel
• 3 piece ball valve
• 1/2" ID valve body
• 1.5" TC on one side
• 1/2" threaded NPT (female) other side
• Does not include TC gasket
• Does not include TC clamp
• Does not include 1/2" hose barb

• 1.5“TC至½”外螺紋NPT螺紋接頭
• 304不銹鋼結構
• 將內螺紋轉換為TC連接
• 兼容½“內球閥