型號: 21915870645402
該套件旨在包括使用InfuSsion Mash Tun附帶的再循環隔板進行渦流和混合再循環過程所需的所有組件。要安裝套件，首先要在mash tun的再循環隔板外部安裝附帶的1/2“FPT x 1/2”倒鉤。務必使用PTFE膠帶進行液密密封。
接下來，找到3/8“滾花鎖緊螺母，3/8”矽膠管和再循環歧管。將管子修剪到所需的長度，然後使用軟管夾將管子的兩端固定到歧管和鎖緊螺母上。
作為最佳實踐，使用vorlauf附件開始麥芽汁再循環前5-10分鐘，以清除任何小顆粒顆粒並設置搗碎床，然後將vorlauf附件更換為再循環歧管，用於剩餘的醪液休息。請記住，該套件設計用於麥芽汁泵和外部熱源，如RIMS管，以保持不提供的醪液溫度。
該套件包括：
This kit is designed to include all the necessary components to use the recirculation bulkhead included with the InfuSsion Mash Tun for vorlauf and mash recirculation processes. To install the kit, begin by installing the included 1/2" FPT x 1/2" Barb on the exterior of your mash tun's recirculation bulkhead. Be sure to use PTFE tape for a liquid-tight seal.
Next, locate the 3/8" knurled locknut, 3/8" silicone tubing, and recirculation manifold. Trim the tubing to your desired length, and then use the hose clamps to secure the two ends of the tubing to the manifold and locknut.
As a best practice, begin the mash recirculation for the first 5-10 mins using the vorlauf attachment to clear any small grain particulate and to set the mash bed, then swap the vorlauf attachment for the recirculation manifold for the remainder of the mash rest. Please keep in mind this kit is designed to use with a wort pump and an external heat source, such as a RIMS tube to maintain mash temps, which is not supplied.
The kit includes:
該套件旨在包括使用InfuSsion Mash Tun附帶的再循環隔板進行渦流和混合再循環過程所需的所有組件。要安裝套件，首先要在mash tun的再循環隔板外部安裝附帶的1/2“FPT x 1/2”倒鉤。務必使用PTFE膠帶進行液密密封。
接下來，找到3/8“滾花鎖緊螺母，3/8”矽膠管和再循環歧管。將管子修剪到所需的長度，然後使用軟管夾將管子的兩端固定到歧管和鎖緊螺母上。
作為最佳實踐，使用vorlauf附件開始麥芽汁再循環前5-10分鐘，以清除任何小顆粒顆粒並設置搗碎床，然後將vorlauf附件更換為再循環歧管，用於剩餘的醪液休息。請記住，該套件設計用於麥芽汁泵和外部熱源，如RIMS管，以保持不提供的醪液溫度。
該套件包括：
This kit is designed to include all the necessary components to use the recirculation bulkhead included with the InfuSsion Mash Tun for vorlauf and mash recirculation processes. To install the kit, begin by installing the included 1/2" FPT x 1/2" Barb on the exterior of your mash tun's recirculation bulkhead. Be sure to use PTFE tape for a liquid-tight seal.
Next, locate the 3/8" knurled locknut, 3/8" silicone tubing, and recirculation manifold. Trim the tubing to your desired length, and then use the hose clamps to secure the two ends of the tubing to the manifold and locknut.
As a best practice, begin the mash recirculation for the first 5-10 mins using the vorlauf attachment to clear any small grain particulate and to set the mash bed, then swap the vorlauf attachment for the recirculation manifold for the remainder of the mash rest. Please keep in mind this kit is designed to use with a wort pump and an external heat source, such as a RIMS tube to maintain mash temps, which is not supplied.
The kit includes:
