• Not for Brewmaster Edition 7 Gal Chronical
• Set of 3 legs
• For Chronical 7 Gal Standard Edition
• Slips over leg bottoms
• 304 Stainless Steel
• 10" length
• 3/8" threaded insert in leg bottom for mounting 3/8" casters
• If you have standard edition Chronical 7 gal and you want a stainless shelf accessory, then use these extensions together with 3/8" casters to secure the shelf (since your Chronical doesn't have threaded inserts in the original leg bottoms)

• Leg Extensions | 7 gal Chronical

• 304 Stainless construction
• Compression fitting
• Universal 1/2" hose barb
• Fits to 17 mm hole
• Check out our 17 mm drill bit!
• Great for running a 1/2" barb off the side of any vessel (plastic or stainless).  Drill or punch a 17 mm hole and away you go!

• Hose Barb | ½” to Compression

• 304 Stainless construction
• Compression fitting
• Universal 1/2" hose barb
• Fits to 17 mm hole
• Check out our 17 mm drill bit!
• Great for running a 1/2" barb off the side of any vessel (plastic or stainless).  Drill or punch a 17 mm hole and away you go!

• Hose Barb | ½” to Compression

Hose Barb | ½” to 1.5” TC

• 304 Cast Stainless Steel
• 1/2"  FPT (female)
• to 1/2" hose barb
• Use on our MT re-circ bulkhead fitting (see thumbnail)

Hose Barb | ½” to ½” FPT

• 304 Stainless Steel
• Knurled locking nut (1/2" FPT)
• 3/8" hose barb
• 2 x silicone o-rings included
• If buying for retrofit job, need purchase our mash tun bulkhead fitting (see thumbnail second from bottom)
• Needed for MT re-circulation manifold (see thumbnail bottom)

• Hose Barb | ⅜” to ½” FPT Knurl

• 304 Stainless
• 1.5" TC 
• 3/8" hose barb
• Gasket not included

• Hose Barb | ⅜” to 1.5” TC

• 304 Stainless Steel
• 1/2" FPT (female) on mash tun side
• to 1/2" MPT (male) on other
• 1/2" hose barb / T
• Hose clamp not included

• Hose Barb | ½” Re-Circ T-Barb

• 304 Stainless Steel
• 1.5" TC
• 1/2" Barb
• 90 degree elbow barb
• Does not include gasket
• Does not include hose clamp

• Hose Barb | ½” 90° to 1.5” TC

• Custom tooled for FTSs/Bucket lids!
• Fits into blow off / airlock hole
• 1/2" hose barb
• 304 Stainless construction
• Includes 1 spare o-ring
• (1 o-ring for use / 1 spare)

• Hose Barb | ½” 90° for Blow-Off

• 304 Stainless Steel
• For pressurized transfers
• Universal - use on any 1.5" TC flange
• No need for pressure gauge! 
• Pressure relief valve integrated to fitting!
• Valve releases at 2-2.5 psi
• 3/8" hose barb
• Perfect for "pushing beer" to kegs!
• Another innovative product from Ss !!!
• NEED TC CLAMP!
• Find clamp on accessories page

• Hose Barb | Pressurized Transfer Fitting 1.5” TC

• Cast 304 Stainless Steel
• 1/2" for use on 1/2" ball valve (racking)
• 3/4" for use on Chronical dump valve
• 3/4" has OD of 0.8175" on barb

• Hose Barb | Barb to Threaded