型號: 21915870486450
該套件專為慢性BME發酵罐的所有者而設計，包括將CO 2壓力引入發酵罐所需的一切， 無需取下蓋帽並冒O2污染。慢性BME的3“蓋帽包括一個PRV，可以防止壓力從建築到不安全的水平。
由於Chronical BME用戶的開放式和封閉式轉移都很受歡迎，因此該套件不包括桶的輸出側，因此請添加TC 1/2“倒鉤，3/8”倒鉤或1/4“MFL配件以及您計劃進行的轉移類型的適當管道。
建立：
首先找到1/2“管並將一側連接到Chronicical BME附帶的3”TC蓋帽的吹氣倒鉤上。然後將1/2“管的另一側連接到1.5”TC到1/2“倒鉤接頭，使用軟管夾固定兩個連接。然後將1.5”TC連接到1/2“倒鉤接頭到附帶的1.5 “TC至1/4”MFL配有TC夾具和墊圈。最後，1/4“MFL連接可與CO2調節器上使用的普通氣體管線擴口配件連接。
該套件僅包含向您的發酵罐中引入壓力的附件。它不包括啤酒輸出的配件。
套件包括：
This kit is designed for owners of Chronical BME Fermenters and includes everything you need to introduce CO2 pressure into your fermenter without removing the lid cap and risking O2 contamination. The Chronical BME's 3" Lid cap includes a PRV that prevents pressure from building to unsafe levels.
Due to the popularity of both open and closed transfers with Chronical BME users, this kit does not include the output side to the keg, so please add a TC 1/2" barb, 3/8" barb or 1/4" MFL fitting and the appropriate tubing for the type of transfer you plan on doing.
Setup:
Begin by locating the 1/2" tubing and attach one side to the 3" TC lid cap's blow off barb that was included with the Chronical BME. Then attach the other side of the 1/2" tubing to the 1.5" TC to 1/2" Barb fitting, using hose clamps to secure both connections. Then attach the 1.5" TC to 1/2" Barb fitting to the included 1.5" TC to 1/4" MFL fitting with a TC clamp and gasket. Lastly, the 1/4" MFL connection can interface with common gas fittings used on CO2 regulators.
This kit only includes accessories to introduce pressure into your fermenter. It dos not include accessories for beer output.
Kit Includes:
該套件專為慢性BME發酵罐的所有者而設計，包括將CO 2壓力引入發酵罐所需的一切， 無需取下蓋帽並冒O2污染。慢性BME的3“蓋帽包括一個PRV，可以防止壓力從建築到不安全的水平。
由於Chronical BME用戶的開放式和封閉式轉移都很受歡迎，因此該套件不包括桶的輸出側，因此請添加TC 1/2“倒鉤，3/8”倒鉤或1/4“MFL配件以及您計劃進行的轉移類型的適當管道。
建立：
首先找到1/2“管並將一側連接到Chronicical BME附帶的3”TC蓋帽的吹氣倒鉤上。然後將1/2“管的另一側連接到1.5”TC到1/2“倒鉤接頭，使用軟管夾固定兩個連接。然後將1.5”TC連接到1/2“倒鉤接頭到附帶的1.5 “TC至1/4”MFL配有TC夾具和墊圈。最後，1/4“MFL連接可與CO2調節器上使用的普通氣體管線擴口配件連接。
該套件僅包含向您的發酵罐中引入壓力的附件。它不包括啤酒輸出的配件。
套件包括：
This kit is designed for owners of Chronical BME Fermenters and includes everything you need to introduce CO2 pressure into your fermenter without removing the lid cap and risking O2 contamination. The Chronical BME's 3" Lid cap includes a PRV that prevents pressure from building to unsafe levels.
Due to the popularity of both open and closed transfers with Chronical BME users, this kit does not include the output side to the keg, so please add a TC 1/2" barb, 3/8" barb or 1/4" MFL fitting and the appropriate tubing for the type of transfer you plan on doing.
Setup:
Begin by locating the 1/2" tubing and attach one side to the 3" TC lid cap's blow off barb that was included with the Chronical BME. Then attach the other side of the 1/2" tubing to the 1.5" TC to 1/2" Barb fitting, using hose clamps to secure both connections. Then attach the 1.5" TC to 1/2" Barb fitting to the included 1.5" TC to 1/4" MFL fitting with a TC clamp and gasket. Lastly, the 1/4" MFL connection can interface with common gas fittings used on CO2 regulators.
This kit only includes accessories to introduce pressure into your fermenter. It dos not include accessories for beer output.
Kit Includes:
