• 對於BREWMASTER KETTLES
• 不適合標準的Ss KETTLES
• 這是一個TRI-CLAMP溫度計
• 不包括TC箝位
• 不包括TC墊片
• 僅限溫度計組件（如圖）
• 3“錶盤面
• 1.5“TC 
• +/- 1％精度（全跨度）
• • FOR BREWMASTER KETTLES
  • NOT FOR STANDARD Ss KETTLES
  • THIS IS A TRI-CLAMP THERMOMETER
  • Does not include TC clamp
  • Does not include TC gasket
  • Thermometer assy only (pictured)
  • 3" dial face
  • 1.5" TC 
  • +/-1% accuracy (full span)

  • Thermometer | 1.5” TC for Kettle BME & eKettle

• 304不銹鋼
• 尺寸：5.5“x 3.5”
• 3 x 1.5“TC法蘭
• TC夾具不包括在內
• TC墊圈不包括在內
• • 304 Stainless Steel
  • Dimensions: 5.5" x 3.5"
  • 3 x 1.5" TC flanges
  • TC Clamps not included
  • TC Gaskets not included

  • Tee | Full Size 1.5" TC

• 304不銹鋼
• 3“TC to 1.5”TC - 非常適合BME Chronicals   $658
• 6“TC to 3”TC - 適用於10 Gal Brite Tank CIP   $1252
• 墊圈不包括在內
• • 304 Stainless Steel
  • 3" TC to 1.5" TC - Great for BME Chronicals  $658
  • 6" TC to 3" TC - Great for 10 Gal Brite Tank CIP  $1252
  • Gaskets NOT included

  • TC Reducers

• 食品級矽膠
• 17mm  小  $150
• 7.5 -  1.5"TC端口, 大 $200
• • Food grade silicone

  • Stoppers for Lids

• 設計緊湊
• 304不銹鋼
• 2 x 1.5“TC法蘭
• TC墊圈不包括在內
• TC夾具不包括在內
• • Compact design
  • 304 Stainless Steel
  • 2 x 1.5" TC flanges
  • TC Gaskets not included
  • TC Clamps not included

  • Micro Elbow

• 設計緊湊
• 304不銹鋼
• 3 x 1.5“TC法蘭
• TC墊圈不包括在內
• TC夾具不包括在內
• • Compact design
  • 304 Stainless Steel
  • 3 x 1.5" TC flanges
  • TC Gaskets not included
  • TC Clamps not included

  • Tee | Micro 1.5” TC

縮放| 高達3.5桶 $4948 套件帶刻度版 $6928

• 304不銹鋼結構
• 專為HLT的重力進料而設計
• 或者掛上你自己的泵/流量控制閥
• 3/8“直徑不銹鋼管 
• 管道入口處有3/8“倒鉤
• 用於Ss Mash Tun的定制矽膠手柄支架
• 輕鬆調節噴頭高度/向下的高度
• 均勻的液體分散噴射頭
• • 304 Stainless Steel construction
  • Designed for gravity feed from HLT
  • Or hook your own pump / flow control valve
  • 3/8” diameter stainless tubing 
  • 3/8" barb on inlet of tubing
  • Custom silicone handle mount for Ss Mash Tun
  • Easily adjust height of sparge head up  / down
  • Uniform liquid dispersion fom sparge head

  • Sparge Arm | InfuSsion Mash Tun

• 304不銹鋼
• 1.5“TC法蘭兩端
• 分解以便於清潔
• TC墊圈（2）不包括在內
• 三角夾鉗不包括在內
• 不包括腿部擴展
• 將一端安裝到卸料口，另一端用1.5“TC平蓋密封，你就有了一個漂亮的酵母收集容器！
• 7.5“法蘭到法蘭
• • 304 Stainless Steel
  • 1.5" TC flanges both ends
  • Breaks down for easy cleaning
  • TC gaskets (2) NOT included
  • Triclover clamps NOT included
  • Leg extensions NOT included
  • Fit up one end to your dump port and the other end seal off with a 1.5" TC flat cap and you have a nice yeast collection container!
  • 7.5" flange to flange

  • Sight Glass | 7.5”

• 小巧緊湊的設計
• 總長2.2英寸
• 無數的應用/用途！
• 304不銹鋼 
• 1.5“TC法蘭兩端
• 分解以便於清潔
• TC墊圈不包括在內
• TC夾具不包括在內
• 適合（沒有腿部延伸）標準的Chronical 7 gal（圖示為Brewmaster Edition Chronical 7 gal）
• • Small and compact design
  • 2.2 inches total length
  • Countless applications / uses!
  • 304 Stainless Steel 
  • 1.5" TC flanges both ends
  • Breaks down for easy cleaning
  • TC gaskets not included
  • TC Clamps not included
  • Will fit (without leg extensions) on a standard Chronical 7 gal (pictured here is Brewmaster Edition Chronical 7 gal)

  • Sight Glass | 2.25”

• 304不銹鋼結構
• 很高興把你的放氣船
• 使用腿部伸展時增加穩定性！
• 適用於7 Gal Brewmaster Edition Chronicals  $1054元
• 適用於14 Gal Chronicals  $1186元
• 適用於 半桶 Chronicals  $1318元
• 可用於標準版和釀酒師的14 /半英鎊
• 不適用於標準版本7 GAL CHRONICAL（腿部底部沒有螺紋嵌件，用於安裝在傳統的Chronical 7上），除非您購買了腿部延伸部分，因為在腿部擴展已經穿過螺釘的情況下它會工作在他們中
• 如果您計劃與貨架一起使用，請不要購買腳踏靴！你將需要3/8“螺紋乾式腳輪（你可以看到角落裡的安裝孔）
• • 304 Stainless Steel construction
  • Great to put your blow-off vessel
  • Adds stability when using leg extensions! 
  • Avail for 7 Gal Brewmaster Edition Chronicals $1054
  • Avail for 14 Gal Chronicals  $1186
  • Avail for Half bbl Chronicals  $1318
  • Avail for 14/Half bbl both standard and Brewmaster
  • NOT FOR STANDARD EDITION 7 GAL CHRONICAL (there are no threaded inserts in the leg bottoms for this to mount to on the legacy Chronical 7's), UNLESS YOU BUY THE LEG EXTENSIONS ALSO -  IN WHICH CASE IT WILL WORK SINCE THE LEG EXTENSIONS HAVE THREADED INSERTS IN THEM
  • DO NOT BUY CASTER BOOTS IF YOU PLAN TO USE TOGETHER WITH THE SHELF!!!  YOU WILL NEED 3/8" THREADED STEM TYPE CASTERS (you can see the mounting holes in corners)

  • Shelf | Chronicals

• 只與我們的unitank和brite油箱槓桿式樣品閥和旋鈕式取樣閥接口
• 全304不銹鋼10轉角線圈
• 5.5英尺的不銹鋼線圈允許在壓力下取樣
• 線圈焊接到壓縮體上
• 與所有Unitank兼容
• 兼容所有Pro Unitank
• 不銹鋼管的內徑為3 mm，外徑為4 mm
• 採樣閥不包括在內
• • Only interfaces with our unitank and brite tank lever style sample valves and Knob Style Sampling Valves
  • All 304 Stainless 10 Turn Proof Coil
  • 5.5 feet of stainless coil allows for sampling under pressure
  • Coil is welded to compression body
  • Compatible with all Unitanks
  • Compatible with all Pro Unitanks
  • Stainless tubing is 3 mm ID and 4 mm OD
  • Sampling valve NOT INCLUDED

  • Sampling Coil